Dishwasher Repair and Installation Providers in Ludlow

The fact that my call has returned, despite the fact that my message made it clear that I was interested in the work that this company is doing, there is a real balance of this company and they suggest that they have their customers who behave with the mark and neutrality. I invited to clean the air channel and left a message in the audio email tool. Mr. Young re -invited me on the same day, but he said that his company did not clean the channel, but in that category with the Angie menu. He recommended another company that believed that he cleaned the air channel and offered Fontenerías help that he was also interested in doing.

The plumber that came to diagnose our problem was for one hour. We asked the plumber to explain the problem and was rude, patience and approach. We rent another person because of the situation. We were expected to pay for one hour of work and receive the bill for two hours. Summary: Without the need for training in customer service, rudeness and customer service. Evaluation of water leakage.

Jerry arrived, as usual, on time and complete the work without any problem. The price was very appropriate. The toilet has been installed again

He was modest and professional. He felt he did a good job. Replace the kitchen faucet.. Expert dishwasher repairs at your service! professional solutions for smooth plumbing system.

This review needs to learn some of the skills of stickers and contact for the owner and his coated partner. I went to this store to get some of the specified pieces that Spaki said I can find in this store. Give me the wrong parts, which led me to return to exchange. When I came back, the man argued in the picture that it was my fault and if you were ** $! If you want to cut, you need to turn off the F!* %. Every year I went to supply homes, I never met people from dirty mouths behind the meter. Apparently, the owner (Michael) and unpleasant pigs with him are very sad men who have no happiness or happiness in their lives. I will never return to this store. Interestingly, my father knew Leonard Stern for many years, the original owner and was a respectable and professional person. The son is an animal. Previous reviews had other experiences like me. Someone thinks that after some negative criticisms they will benefit their work together, but I think they cannot give what they do not have. Terrible customer service! Good work, guys. Buy the offer and cut

I used Feli for all plumbing in my house and the tenant. His work was always excellent and appropriate. He saved me $ 1,600. Just a good honest man. Paint leaks and others

The coach came out on the same day we call. His work was professional and the price was appropriate (for a plumber). We appreciate the quick response and call it when the future work is required. I would like to recommend anyone. We had some welding in the tap that was leaking and needing to change it.

Very well. The plumber diagnosed the problem and cleaned the siege. The bathroom had to be removed to do this, so it was not cheap, but it solved the problem. He quickly arrived and created it efficiently at work. We had a very slow bath and toilet.

It was the adventurous work that is progressing several times and not good at other times. The reason for the low classification (1) is the lack of insulation around the cold and hot water pipes in the very hot attic and (2) clouds from the expired dust, both of which are shown below. Many pictures are attached. In May 2018, we got rid of the Kitech Hot and Cold Water, which was installed by Builder (17 years ago), and we have installed new and hot hot water lines from PEX all over the house. The work is presented quickly and the tubes were completed in less than three days. Finland took two days, so everyone was completed within 5 days (from Monday to Friday). Problems: 1. He said that the hot and cold attic was not touched, but only put the value foam tube R3 on the lines, and there were distances through which you can see the red (hot) and blue (cold) holes. HaI .., the R-3 tube has not been properly closed and PEX was unable to surround most places. In some places, abandoned the isolation of PEX and did not pull the original isolation. See the attached pictures. 2. Sufficiently insufficient attic from the warm and cold PEX, which leads to isolation, cold and cold water temperatures can be about 15 degrees above the external environment. This is not a summer problem in summer, but there is a problem with the cold side. For example, on the distinguished days of our 100 degrees, the cold water temperature, 115 degrees was measured in 4 minutes. If you reach more than 110 outputs (which is what it does here), then the hot/cold water at the points of sale is dangerous. 3. Your pipeline and your final work are not coordinated on plaster panels. After the pipeline is finished, all plastic in the furniture (Wednesday) was canceled. Finland from the dust cloud floor, blind, furniture, everything, later (Friday). More debate: • At the beginning of the work (Monday in the morning), the floor was covered with paper and insurance, and all furniture were covered with plastic. Our connection, Killin, was very useful for organizing everything. • The work continued without a problem, and when the tube was completed and the holes (but no plaster) were covered, all plastic paper and protection were removed. • While testing the system, the only problem was the cold cross to heat the lounge of the external saliva. It was resolved soon. • Fixing plaster panels started with filling, spraying and texture on Thursday. He did not put anything in a small amount of blankets and furniture. • After drying the texture, an electric sanding reduces the surface, causing a cloud of dust covering everything at home. He said he used the HEPA candidate vacuum, but it was not effective with a cloud of dust. • After finishing the paint, we took a whole day to clean the dust. Why will the original plastic cover be preserved until all the work ends? • When the mirrors are repeated, we noticed that one tears, and put it on the floor of the tiles without filling. We receive $ 150 to change it. • Well, we saw that cold water was hot. SACRARARENTO re -installed the Gundfos recycling system. It was not expensive, but in fact a stupid system, every time there is no water in the pump and the local sensor (found in the tap), the atmosphere is very hot to push the cold water line (and return to the hot water tank). Feeling filters, so when the pump is closed, hot water still passes to the cold water line. We cut the local sensor and worked on quiet days. • However, the main problem is that hot and cold water lines in the attic were not properly isolated. The gentle foam tubes have a rating of about 3, and the bad installation of foam pipes is made in hot and cold water lines (not properly closed). They did nothing to keep the tongue insulation, so drought isolating almost closed in some areas. See the attached picture. At a standard temperature of 115 degrees in the open air (our), cold water will be extended. This is definitely a problem with the water and food system for refrigerator water. • We plan to make a trainee or a repairing company to repair everything (the estimated cost is $ 1,200). Repeat that people do not know anything except plumbing, as Lincolns inspectors (who are currently looking for problems in the heat -related pipelines). Conclusions: Cold and cold water lines failed properly to isolate themselves, leading to a possible serious situation. Cold water provisions are exposed to the temperature of the attic, which can easily cause water in the taps, toilets and refrigerators in inputs more than 120 degrees. Imagine to enter a shower with a workshop with more than 120 water and the water temperature cannot be rejected. In winter, with a cold temperature of 17 degrees ....? They fell and washed the isolation fly in many areas and did not replace it. He raised the A/C cooling line in some places. I was in a hurry with all his works in the attic. This is unacceptable and call. Your answer: without an answer. Change Pex Kitech with a new PEX

He arrived on time and spent more time on how to solve the problem because it was difficult to overcome. I have no disgust. Leakation mode.